- Constructing the 'Ukulele Neck
- Shaping of the Neck and Tail Blocks
- Layout and Bending of 'Ukulele Sides and Lining
- Gluing Up of Top and Back of 'Ukulele
- Sanding and Shaping of Sound Board and Back
- Installing Neck onto 'Ukulele Body
- Glue in Top Lining and Top Braces
- Gluing on Sound Board of the 'Ukulele
- Gluing in of Bottom Lining and Back Bracing
- Gluing on Back of 'Ukulele
- Finishing Surface
- Making of Fret Board and Bridge
- Drilling of Holes for Tuning Keys
- Final Finishing
Finishing Surface
Using various grits of sandpaper, sand body and neck making sure all scratches and excess glue are removed, e.g.. start with 100, then 150, 220 and 320. Always sand with the grain.
